We understand that there are a variety of epoxy floor products available to you the consumer and the choices can be overwhelming. When comparing epoxy floor coatings one of the most important considerations is Dry Film Thickness (DFT). Wolverine Coatings epoxy products are 100% solids meaning that whatever the quantity purchased and applied to your floor is the quantity that you will end up with after it has cured. Unlike many of our competitors, there is little to no loss due to solvent evaporation*. In other words, you get what you pay for.
Our most popular Do It Yourself system is comprised of three interrelated components, a primer-BondTite 1101 for superior concrete to coating bond strength, a pigmented semi-ceramic filled body coat-LiquaTile 1184 for impact resistance and an advanced hybrid urethane clear coat-EnduraShield 2254 which provides industry leading abrasion resistance. Each of these components contribute specific performance characteristics which, when combined, result in a superior high performance epoxy system. In order to achieve this high level of performance, minimum quantities of each component must be calculated and applied. In the end we will not provide you with less than a 23mils DFT coating system and, depending on your specific needs, may recommend more**.
Undertaking a proper epoxy floor coating project requires an investment of time, money and understanding. At AlphaGarage we believe that it’s a project that should be done once, done right and done with pride!
* The EnduraShield 2254 is 85~90% solids
**DFT results may vary due to waste and porosity of underlying substrate.